§2023-06-07

• [ATP/VPN/USG FLEX] Initial WAN Setup Wizard (first time configuration)

Supported Devices ATP200 ATP500 ATP800 VPN50 VPN100 VPN300 USG FLEX 100 USG FLEX 100W UGS FLEX 200 USG FLEX 500 USG FLEX 700 Scenario

This guide covers first time setup for internet access on ZLD capable devices. zld-4.30-initial-setup.001.png Initial Setup

Before we begin the internet (WAN) setup on the ZLDL router, the following steps need to be completed.

Unpack the appliance.
Connect the power supply (power cord).
Press the power button to turn the device ON (router takes 3-4 minutes to power up).
Connect a computer to a LAN port on the device, P4.
Connect the DSL/Cable modem to the device, P2.

Accessing the WebUI

To access the ZLD web configuration page please open a web browser on your computer (Internet Explorer, Mozilla Firefox, Google Chrome, etc.). On the address bar please type http://192.168.1.1 to access the WebUI. zld-4.30-initial-setup.002.png

When prompted for user credentials, type admin for the "User Name" and 1234 for the "Password". Click the Login button to enter the WebUI. zld-4.30-initial-setup.003.png Note: If the default password has been changed, use the new password to login. If this is the first time setting up the device and it is not accepting the "1234" password, please press the RESET button on the device (located in rear panel) and hold it down for 10-15 seconds.

The following screen will prompt to update the administrator password. Enter a new administrative password and click the Apply button to save the change. zld-4.30-initial-setup.004.png WAN Set