# Configuration file for genkernel

# This file is sourced by genkernel at startup and determines which options
# we will be using to compile our kernel.  The order of precidence is simple,
# with the internal settings being least important, configuration file
# settings next, and command line options being most important.

# =========COMMON COMMAND LINE OPTION DEFAULTS=========

# Install to $BOOTDIR
#INSTALL="yes"

# Run 'make oldconfig' before compiling this kernel
#OLDCONFIG="yes"
# make oldconfig takes the current kernel configuration in the .config file, 
# and updates it based on the new kernel release. Will not print anything, unless
# a new configuration value is needed.
# --> `gzip -dc /proc/config.gz > .config` --> current running config

# Run 'make menuconfig' before compiling this kernel
#MENUCONFIG="no"

# Run 'make gconfig' before compiling this kernel
#GCONFIG="no"

# Run 'make nconfig' (ncurses 'menuconfig') before compiling this kernel
#NCONFIG="no"

# Run 'make xconfig' before compiling this kernel
#XCONFIG="no"

# Run 'make mrproper' before compiling this kernel
#MRPROPER="yes"
# make clean < make mrproper < make distclean

# Run 'make clean' before compiling this kernel
# Only needed if MRPROPER is set to NO because
# MRPROPER implies 'make clean'.
#CLEAN="yes"

# Mount BOOTDIR automatically if it isn't mounted
#MOUNTBOOT="yes"
# it will mount according to /etc/fstab

# Make symlinks in BOOTDIR automatically
#SYMLINK="no"
# The symlinks are usually named vmlinuz and initramfs, and they point to 
# the respective kernel and initramfs files.
# /boot/vmlinuz -> /boot/vmlinuz-<kernel-version>
# /boot/initramfs -> /boot/initramfs-<kernel-version>.img
# ?? where is this <kernel-version> defined??

# Save the new configuration in /etc/kernels upon
# successful compilation
#SAVE_CONFIG="yes"
# Will be saved as,
# config-<kernel-version>[<local-version>]
#
# <kernel-version> is the version of the kernel being compiled, such as 5.4.83-r1.
# <local-version> is an optional local version string that you can specify 
# in your kernel configuration
# ?? where is this <local-version> defined??

# Enable color output in genkernel
NOCOLOR="false"

# Clear build cache dir on gernkernel start
#CLEAR_CACHEDIR="no"

# Clear all tmp files and caches after genkernel has run
#POSTCLEAR="no"

# Check for x MB free disk space in BOOTDIR
#CHECK_FREE_DISK_SPACE_BOOTDIR=0
# Default is 0 (disabled).

# Check for x MB free disk space in kernel outputdir
#CHECK_FREE_DISK_SPACE_KERNELOUTPUTDIR=0
# Default is 0 (disabled).

# Genkernel uses an independent configuration for MAKEOPTS, and does not source
# /etc/portage/make.conf . You can override the default setting by uncommenting
# and tweaking the following line. Default setting is set up by
# ${GK_SHARE}/${ARCH_OVERRIDE}/config.sh . The recommended value for -j
# argument is: <number of processors>*<number of cores per processor>+1
MAKEOPTS="$(portageq envvar MAKEOPTS)"
# 
# if /etc/portage/make.conf as this line
# MAKEOPTS="-j8"
# then `portageq envvar MAKEOPTS` will return -j8

# Run the kernel make at the following NICE level
NICE=10
#  NICE option is used to set the priority level (also known as the "niceness" or "NICE level") 
# at which the kernel compilation process will run
# Lower values of NICE make the process run with higher priority, potentially 
# consuming more CPU resources.


# Add bcache support
#BCACHE="no"
# bcache is a Linux kernel feature that provides a block-level caching mechanism 
# for storage devices. 
# It allows you to use one or more fast storage devices, such as SSDs (Solid State Drives), 
# as cache for slower, larger storage devices like traditional HDDs (Hard Disk Drives) 
# or other types of storage. 

# Add LVM support
#LVM="no"
# LVM, which stands for Logical Volume Manager, is a software-based technology used in 
# Linux and some other Unix-like operating systems to manage disk drives and storage devices.

# Add LUKS support
#LUKS="no"
# LUKS, which stands for Linux Unified Key Setup, is a disk encryption specification and 
# an associated set of tools used for encrypting entire block devices (such as hard drives 
# or partitions) on Linux-based operating systems. 

# Add GnuPG support
#GPG="no"
# GnuPG, which stands for GNU Privacy Guard, is a free and open-source software tool 
# used for encryption, decryption, digital signatures, and secure communication. 
# It is based on the OpenPGP (Pretty Good Privacy) standard and is commonly used for 
# securing email communication, file encryption, and verifying the authenticity of digital files.

# Add keyctl support for loading LUKS passphrase into a keyring
#KEYCTL="no"
#  keyctl utility that allows for the management and manipulation of security keys. Specifically, 
# it is related to the interaction between the Linux Unified Key Setup (LUKS) encryption subsystem 
# and the key management facilities provided by the kernel.

# Add in early microcode support: this sets the kernel options for early microcode loading
# Possible values: empty/"no", "all", "intel", "amd"
#MICROCODE="all"
# Early Loading: "Early microcode support" means that the system firmware or BIOS has the 
# capability to load microcode updates for the CPU early in the boot process, often before 
# the operating system kernel is loaded. This allows the CPU to operate with the most 
# up-to-date microcode from the start.

# Include early microcode in generated initramfs.
# Only needed if system cannot load multiple initramfs.
# NOTE: >=sys-boot/grub-2 will detect and auto-load {amd,intel}-uc.img file
#       provided by sys-firmware/intel-microcode[initramfs] or
#       sys-kernel/linux-firmware[initramfs].
#MICROCODE_INITRAMFS="no"

# Add NFS support
#NFS="no"

# Add DMRAID support
#DMRAID="no"
# DMRAID is a technology that allows you to configure and manage software RAID 
# (Redundant Array of Independent Disks) devices using the device mapper framework 
# on Linux. It is often used when you want to create and manage software-based RAID arrays.

# Add SSH support
#SSH="no"
# ?? not related to sshd services???

# Add b2sum support
#B2SUM="no"
# B2sum is a cryptographic hash function and checksum tool used to verify the integrity of data. 
# It is part of the BLAKE2 family of cryptographic hash functions, which are designed to be fast and secure.

# Include busybox in the initramfs. If included, busybox is rebuilt
# if the cached copy is out of date.
BUSYBOX="yes"
# If you need BusyBox for tasks like emergency recovery or debugging during 
# the initramfs phase, it's a good idea to include it.

# Add MDRAID support
#MDADM="no"

# Specify a custom mdadm.conf.
# By default the initramfs will be built *without* an mdadm.conf and will auto-detect
# arrays during bootup.  Usually, this should not be needed.
#MDADM_CONFIG="/etc/mdadm.conf"
# MDRAID is a software RAID (Redundant Array of Independent Disks) implementation in Linux.

# Add Multipath support
#MULTIPATH="no"
# multipath is used to detect and coalesce multiple paths to devices, for fail-over or performance reasons.

# Add iSCSI support
#ISCSI="no"
# with iSCSI you can access storage over an IP-based network. 

# Add e2fsprogs support
E2FSPROGS="yes"
# Ext2/3/4 filesystem utilities

# Include support for unionfs
#UNIONFS="no"
# A user space unionfs implementation

# Include support for zfs volume management.  If unset, genkernel will attempt
# to autodetect and enable this when rootfs is on zfs.
#ZFS="no"

# Add BTRFS support
#BTRFS="no"

# Add xfsprogs support
XFSPROGS="yes"

# Install firmware onto root filesystem
# Will conflict with sys-kernel/linux-firmware package
#FIRMWARE_INSTALL="no"

# Add firmware(s) to initramfs
#FIRMWARE="no"

# Specify directory to pull from
#FIRMWARE_DIR="/lib/firmware"

# Specify a comma-separated list of firmware files or directories to include,
# relative to FIRMWARE_DIR.  If empty or unset, the full contents of 
# FIRMWARE_DIR will be included (if FIRMWARE option above is set to YES).
#FIRMWARE_FILES=""

# Add new kernel to grub
# Possible values: empty/"no", "grub", "grub2"
#BOOTLOADER="no"

# Use sandbox when building initramfs
#SANDBOX="yes"

# Embed and set font early on boot
# Possible values: empty/"none", "current", <PSF file>
#BOOTFONT="none"

# Add boot splash using splashutils
# SPLASH="yes"
# splash_geninitramfs is obsoleted

# Use this splash theme. If commented out - the "default" name theme is used.
# Also, SPLASH="yes" needs to be enabled for this one to work.
# This supersedes the "SPLASH_THEME" option in '/etc/conf.d/splash'.
# SPLASH_THEME="gentoo"

# Run "emerge @module-rebuild" automatically when possible and necessary
# after kernel and modules have been compiled
#MODULEREBUILD="yes"

# Run the specified command in the current environment after the kernel and
# modules have been compiled, useful to rebuild external kernel module
# (see MODULEREBUILD above) or installing additional
# files (use 'copy_image_with_preserve dtb path/to/dtb dtb <kernelname>')
#CMD_CALLBACK=""


# =========KEYMAP SETTINGS=========
#
# Force keymap selection at boot
#DOKEYMAPAUTO="no"

# Enables keymap selection support
#KEYMAP="yes"


# =========LOW LEVEL COMPILE SETTINGS=========
#
# Assembler to use for the kernel.  See also the --kernel-as command line
# option.
#KERNEL_AS="as"

# Archiver to use for the kernel.  See also the --kernel-ar command line
# option.
#KERNEL_AR="ar"

# Compiler to use for the kernel (e.g. distcc).  See also the --kernel-cc
# command line option.
#KERNEL_CC="gcc"

# Linker to use for the kernel.  See also the --kernel-ld command line option.
#KERNEL_LD="ld"

# NM utility to use for the kernel.  See also the --kernel-nm command line option.
#KERNEL_NM="nm"

# GNU Make to use for kernel.  See also the --kernel-make command line option.
#KERNEL_MAKE="make"

# objcopy utility to use for the kernel.  See also the --kernel-objcopy command
# line option.
#KERNEL_OBJCOPY="objcopy"

# objdump utility to use for the kernel.  See also the --kernel-objdump command
# line option.
#KERNEL_OBJDUMP="objdump"

# ranlib utility to use for the kernel.  See also the --kernel-ranlib command
# line option.
#KERNEL_RANLIB="ranlib"

# readelf utility to use for the kernel.  See also the --kernel-readelf command
# line option.
#KERNEL_READELF="readelf"

# strip utility to use for the kernel.  See also the --kernel-strip command line
# option.
#KERNEL_STRIP="strip"

# Assembler to use for the utilities.  See also the --utils-as command line
# option.
#UTILS_AS="as"

# Archiver to use for the utilities.  See also the --utils-ar command line
# option.
#UTILS_AR="ar"

# C Compiler to use for the utilities (e.g. distcc).  See also the --utils-cc
# command line option.
#UTILS_CC="gcc"

# C++ Compiler to use for the utilities (e.g. distcc).  See also the --utils-cxx
# command line option.
#UTILS_CXX="g++"

# Linker to use for the utilities.  See also the --utils-ld command line
# option.
#UTILS_LD="ld"

# NM utility to use for the utilities.  See also the --utils-nm command line option.
#UTILS_NM="nm"

# GNU Make to use for the utilities.  See also the --utils-make command line
# option.
#UTILS_MAKE="make"

# Target triple (i.e. aarch64-linux-gnu) to build for. If you do not
# cross-compile, leave blank for auto detection.
#CROSS_COMPILE=""

# Target triple (i.e. aarch64-linux-gnu) to build kernel for.  Utilities will be
# built for the native target, not this target. If you do not cross-compile,
# leave blank.
#KERNEL_CROSS_COMPILE=""

# Override default make target (bzImage). See also the --kernel-target
# command line option. Useful to build a uImage on arm.
#KERNEL_MAKE_DIRECTIVE_OVERRIDE="fooImage"

# Override default kernel binary path. See also the --kernel-binary
# command line option. Useful to install a uImage on arm.
#KERNEL_BINARY_OVERRIDE="arch/foo/boot/bar"


# =========GENKERNEL LOCATION CONFIGURATION=========
#
# Variables:
#   %%ARCH%%  - Final determined architecture
#   %%CACHE%% - Final determined cache location

# Set genkernel's temporary work directory
TMPDIR="/var/tmp/genkernel"

# Set the boot directory, default is /boot
BOOTDIR="/boot"

# Default share directory location
GK_SHARE="${GK_SHARE:-/usr/share/genkernel}"
# ${GK_SHARE:-/usr/share/genkernel} is a variable expansion that has a default value. 
# If GK_SHARE is already defined with a value, it will use that value. 
# If not, it will use the default value /usr/share/genkernel.

# Location of the default cache
CACHE_DIR="/var/cache/genkernel"

# Location of DISTDIR, where our source tarballs are stored
DISTDIR="${GK_SHARE}/distfiles"

# Log output file
LOGFILE="/var/log/genkernel.log"

# Debug Level
LOGLEVEL=1


# =========COMPILED UTILS CONFIGURATION=========
#
# Default location of kernel source
DEFAULT_KERNEL_SOURCE="/usr/src/linux"

# Default kernel config (only use to override using
# arch/%%ARCH%%/kernel-config-${VER}.${PAT} !)
#DEFAULT_KERNEL_CONFIG="${GK_SHARE}/arch/%%ARCH%%/kernel-config"

# Specifies a user created busybox config
#BUSYBOX_CONFIG="/path/to/file"

# NOTE: Since genkernel 3.4.41 the version of
#   busybox, lvm, mdadm, ... have been moved to
#   /usr/share/genkernel/defaults/software.sh in order to
#   reduce the merging you have to do during etc-update.
#   You can still override these settings in here.


# =========MISC KERNEL CONFIGURATION=========
#
# Set kernel filename which will be used when kernel will be installed
# into BOOTDIR. See man page to learn more about available placeholders.
#KERNEL_FILENAME="vmlinuz-%%KV%%"

# Set kernel symlink name which will be used when kernel will be installed
# into BOOTDIR and SYMLINK option is enabled
#KERNEL_SYMLINK_NAME="kernel"

# This option will set kernel option CONFIG_LOCALVERSION.
# Use special value "UNSET" to unset already set CONFIG_LOCALVERSION.
#KERNEL_LOCALVERSION="-%%ARCH%%"

# This option is only valid if kerncache is
# defined. If there is a valid kerncache no checks
# will be made against a kernel source tree.
#KERNEL_SOURCES="yes"

# Build a static (monolithic kernel)
#BUILD_STATIC="no"

# Make and install kernelz image (PowerPC)
#GENZIMAGE="no"

# Archive file created using tar containing kernel binary, content
# of /lib/modules and the kernel config.
# NOTE: Archive is created before the callbacks are run!
#KERNCACHE="/path/to/file.tar.xz"

# Prefix to kernel module destination, modules
# will be installed in <prefix>/lib/modules
#KERNEL_MODULES_PREFIX=""


# =========MISC INITRAMFS CONFIGURATION=========
#
# Set initramfs filename which will be used when initramfs will be
# installed into BOOTDIR. See man page to learn more about available
# placeholders.
#INITRAMFS_FILENAME="initramfs-%%KV%%.img"

# Set initramfs symlink name which will be used when initramfs will be
# installed into BOOTDIR and SYMLINK option is enabled
#INITRAMFS_SYMLINK_NAME="initramfs"

# Copy all compiled kernel modules to the initramfs
#ALLRAMDISKMODULES="no"

# Copy selected modules to the initramfs based on arch-specific modules_load file
#RAMDISKMODULES="yes"

# Archive file created using tar containing kernel and initramfs.
# NOTE: No modules outside of the initramfs will be included!
#MINKERNPACKAGE="/path/to/file.tar.xz"

# Add additional modules to the initramfs using the module groups defined
# in /usr/share/genkernel/defaults/modules_load (see this file for
# more details).  This would be used if, for example, you
# required an additional crypto module or network device at boot
# time and did not want to statically compile these in the kernel.
# Options take the form AMODULES_{group} where {group} is one of
# the groups in modules_load (which are in the form MODULES_{group}).
# Use this with caution.
#AMODULES_group="module-to-include another-module"

# Override the default modules in the initramfs, for a given group, as defined by
# /usr/share/genkernel/defaults/modules_load and the per-arch modules_load
# files. You PROBABLY want to use AMODULES_* above, and NOT MODULES_* here.
# If you use MODULES_* here, the default and per-arch modules will NOT be used.
#MODULES_group1="some-module"
#MODULES_group2="" # Load no modules for this group

# Override the default used linuxrc script.
#LINUXRC="/path/to/custom/linuxrc"

# Archive file created using tar containing modules after
# the callbacks have run
#MODULESPACKAGE="/path/to/file.tar.xz"

# Directory structure to include in the initramfs,
# only available on >=2.6 kernels
#INITRAMFS_OVERLAY=""

# Build the generated initramfs into the kernel instead of
# keeping it as a separate file
#INTEGRATED_INITRAMFS="no"

# Compress generated initramfs
#COMPRESS_INITRD="yes"

# Types of compression: best, xz, lzma, bzip2, gzip, lzop, lz4, zstd, fastest
# "best" selects the best available compression method
# "fastest" selects the fastest available compression method
#COMPRESS_INITRD_TYPE="best"

# wrap initramfs using mkimage for u-boot bootloader
# WRAP_INITRD=no

# Create a self-contained env in the initramfs
#NETBOOT="no"


# =========MISC BOOT CONFIGURATION=========
#
# Specify a default for real_root=
#REAL_ROOT="/dev/one/two/gentoo"

# custom
KERNEL_DIR=/usr/src/linux
KERNEL_CONFIG=/usr/src/linux/arch/arm64/configs/orgpi5+_defconfig
# CONFIG_LOCALVERSION="arm64"
# KERNEL_LOCALVERSION="arm64"

(chroot) orgpi5Gentoo /usr/src # nano /etc/genkernel.conf
(chroot) orgpi5Gentoo /usr/src # genkernel all --kernel-config=menuconfig
* Gentoo Linux Genkernel; Version 4.3.6
* Using genkernel configuration from '/etc/genkernel.conf' ...
* Running with options: all --kernel-config=menuconfig
* ERROR: splash_geninitramfs is required for --splash but was not found!
* Please consult '/var/log/genkernel.log' for more information and any
* errors that were reported above.
* 
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* '/var/log/genkernel.log' so that your issue can be dealt with effectively.
* 
* Please do *not* report kernel compilation failures as genkernel bugs!
* 
* Failed to determine session leader; Will not try to stop child processes
(chroot) orgpi5Gentoo /usr/src # emerge --search splash_geninitramfs
  
[ Results for search key : splash_geninitramfs ]
Searching...

[ Applications found : 0 ]

(chroot) orgpi5Gentoo /usr/src # nano /etc/genkernel.conf
(chroot) orgpi5Gentoo /usr/src # genkernel all --kernel-config=menuconfig
* Gentoo Linux Genkernel; Version 4.3.6
* Using genkernel configuration from '/etc/genkernel.conf' ...
* Running with options: all --kernel-config=menuconfig
* ERROR: --kernel-config file '/usr/src/menuconfig' does not exist!
* Please consult '/var/log/genkernel.log' for more information and any
* errors that were reported above.
* 
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* '/var/log/genkernel.log' so that your issue can be dealt with effectively.
* 
* Please do *not* report kernel compilation failures as genkernel bugs!
* 
* Failed to determine session leader; Will not try to stop child processes
(chroot) orgpi5Gentoo /usr/src # nano /etc/genkernel.conf
(chroot) orgpi5Gentoo /usr/src # genkernel all --kernel-config=oldconfig
* Gentoo Linux Genkernel; Version 4.3.6
* Using genkernel configuration from '/etc/genkernel.conf' ...
* Running with options: all --kernel-config=oldconfig
* ERROR: --kernel-config file '/usr/src/oldconfig' does not exist!
* Please consult '/var/log/genkernel.log' for more information and any
* errors that were reported above.
* 
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* '/var/log/genkernel.log' so that your issue can be dealt with effectively.
* 
* Please do *not* report kernel compilation failures as genkernel bugs!
* 
* Failed to determine session leader; Will not try to stop child processes

(chroot) orgpi5Gentoo /usr/src # genkernel all
* Gentoo Linux Genkernel; Version 4.3.6
* Using genkernel configuration from '/etc/genkernel.conf' ...
* Running with options: all

* Working with Linux kernel 6.1.53-gentoo-r1 for arm64
* Using kernel config file '/usr/share/genkernel/arch/arm64/generated-config' ...
* 
* Note: The version above is subject to change (depends on config and status of kernel sources).

* kernel: >> Initializing ...
*         >> Previous config backed up to .config--2023-10-02--11-39-22.bak
*         >> Running 'make mrproper' ...
*         >> Running 'make oldconfig' ...
*         >> Ignoring --microcode parameter; Architecture does not support microcode loading ...
*         >> Re-running 'make oldconfig' due to changed kernel options ...
*         >> Kernel version has changed (probably due to config change) since genkernel start:
*            We are now building Linux kernel 6.1.53-gentoo-r1-arm64 for arm64 ...
*         >> Compiling 6.1.53-gentoo-r1-arm64 Image ...
*         >> Compiling 6.1.53-gentoo-r1-arm64 modules ...
*         >> Installing 6.1.53-gentoo-r1-arm64 modules (and stripping) ...*         >> Generating module dependency data ...
*         >> Compiling out-of-tree module(s) ...*         >> Saving config of successful build to '/etc/kernels/kernel-config-6.1.53-gentoo-r1-arm64' ...

initramfs: >> Initializing ...
*         >> Appending devices cpio data ...
*         >> Appending base_layout cpio data ...
*         >> Appending util-linux cpio data ...
*         >> Appending eudev cpio data ...
*         >> Appending auxiliary cpio data ...
*         >> Appending busybox cpio data ...
*         >> Appending e2fsprogs cpio data ...
*         >> Appending modprobed cpio data ...
*         >> Appending modules cpio data ...
*         >> Deduping cpio ...
*         >> Pre-generating initramfs' /etc/ld.so.cache ...
*         >> Compressing cpio data (.xz) ...
xz: Reduced the number of threads from 8 to 3 to not exceed the memory usage limit of 3930 MiB

* Kernel compiled successfully!
* 
* --no-bootloader set; Skipping bootloader update ...
* 
* Required kernel parameter:
* 
* 	root=/dev/$ROOT
* 
* Where $ROOT is the device node for your root partition as the
* one specified in /etc/fstab

* If you require Genkernel's hardware detection features, you MUST
* tell your bootloader to use the provided initramfs file '/boot/initramfs-6.1.53-gentoo-r1-arm64.img'.


* WARNING... WARNING... WARNING...
* Additional kernel parameters that *may* be required to boot properly:

* Do NOT report kernel bugs as genkernel bugs unless your bug
* is about the default genkernel configuration...
* 
* Make sure you have the latest ~arch genkernel before reporting bugs.
* Failed to determine session leader; Will not try to stop child processes

(chroot) orgpi5Gentoo /boot # ls -l
total 222408
-rwxr-xr-x 1 root root   230456  5月 31 18:09 boot.bmp
-rwxr-xr-x 1 root root     3339  5月 31 18:08 boot.cmd
-rwxr-xr-x 1 root root     3431 10月  1 08:09 boot.scr
-rwxr-xr-x 1 root root     3411 10月  1 08:08 boot.scr.ori
-rwxr-xr-x 1 root root   219610  5月 31 16:04 config-5.10.110-rockchip-rk3588
drwxr-xr-x 3 root root     4096  5月 31 18:09 dtb
drwxr-xr-x 3 root root     4096  5月 31 18:09 dtb-5.10.110-rockchip-rk3588
-rwxr-xr-x 1 root root 34109952  5月 31 16:04 Image
-rwxr-xr-x 1 root root 31287808 10月  1 07:17 Image-6.1.53-r1
-rwxr-xr-x 1 root root 10018272 10月  2 13:54 initramfs-6.1.53-gentoo-r1-arm64.img
-rwxr-xr-x 1 root root  5892308 10月  1 07:46 initramfs-6.1.53-gentoo-r1.img
-rwxr-xr-x 1 root root 13303896  5月 31 18:16 initrd.img-5.10.110-rockchip-rk3588
-rwxr-xr-x 1 root root  1152056  5月 31 18:09 logo.bmp
-rwxr-xr-x 1 root root      227  5月 31 18:09 orangepiEnv.txt
-rwxr-xr-x 1 root root     1542  5月 31 18:15 orangepi_first_run.txt.template
-rwxr-xr-x 1 root root  7780782  5月 31 16:04 System.map-5.10.110-rockchip-rk3588
-rwxr-xr-x 1 root root  4373892 10月  2 13:01 System.map-6.1.53-gentoo-r1-arm64
-rwxr-xr-x 1 root root  4373892 10月  2 11:50 System.map-6.1.53-gentoo-r1-arm64.old
-rwxr-xr-x 1 root root 13303960  5月 31 18:16 uInitrd
-rwxr-xr-x 1 root root  5892372 10月  1 08:03 uInitrd-6.1.53
-rwxr-xr-x 1 root root  5892372 10月  1 08:04 uInitrd-6.1.53-r1
-rwxr-xr-x 1 root root 34109952  5月 31 16:04 vmlinuz-5.10.110-rockchip-rk3588
-rwxr-xr-x 1 root root 27869696 10月  2 13:01 vmlinuz-6.1.53-gentoo-r1-arm64
-rwxr-xr-x 1 root root 27869696 10月  2 11:50 vmlinuz-6.1.53-gentoo-r1-arm64.old
(chroot) orgpi5Gentoo /boot # mkimage -A arm64 -O linux -T ramdisk -C none -a 0 -e 0  -d initramfs-6.1.53-gentoo-r1-arm64.img uInitrd-6.1.53-r1 
Image Name:   
Created:      Tue Oct  3 00:05:04 2023
Image Type:   AArch64 Linux RAMDisk Image (uncompressed)
Data Size:    10018272 Bytes = 9783.47 KiB = 9.55 MiB
Load Address: 00000000
Entry Point:  00000000